Services

Electronic Component

Technician soldering a component on an electronic module board

Electronic Modules Department

ECM - CPC4 - PCM Repairing and reprogramming

ADF’s ECM Department is an industry leader in the diagnosing, troubleshooting and remanufacturing high quality electronic control modules for diesel engines. These include ECM, ECU or PCM. We also distribute brand new surplus ECMs, which come with ADF’s one-year, no hassle warranty. Our department has over 15 years of experience in the field and is equipped with state-of-the-art labs and tools to diagnose, repair, test and program ECUs. We offer quality service at very competitive prices, with minimum down time for all types of domestic and foreign diesel engines. We also have the capacity to remanufacture other electronic modules for trucks, heavy equipment, generators, marine engines and any diesel engines in general.

Great examples are the Common Powertrain Controller module (CPC4) for Freightliner and Mercedes trucks, Paccar ECMs, Maxxforce ECMs, Cummins ECMs, Detroit ECMs and Caterpillar ECMs. All these and many more have been successfully and completely rebuilt and tested in house by our specialist team.

Electronic module connected to a test bench Damaged module, before and after remanufacturing

Bottom: damaged module, before and after remanufacturing by our department

Our services

Programming services

In compliance with the rules
and regulations

  • Stock calibrations to factory setting
  • Power and economy tunes
  • Off-road programming based on customer’s need

Diagnostic and troubleshooting

Our dedicated team can help you either:

  • At your premises
  • At our location
  • Remotely via Internet and telephone

Repair and return services: how it works

Return or Replace? Two ways to help you get back on the road!

When you send in your module, we will repair it or find a replacement and send it back to you. Units that are sent in for repair will have a quick turn-around after being received and come with a one-year ADF’s no hassle warranty. Turnaround time is subject to change depending on the number of parts received. If the unit needs to be replaced, we will notify the customer and provide a time frame on when you would expect the module to be returned. Replacement units also include a one-year warranty.

Repair and return

  1. Investigating the trouble codes and symptoms associated with your module.
  2. External inspection of the module
  3. Internal inspection and repair, as directed by damage found or manufacturer technical service bulletins
  4. Functionally testing
  5. Update the programming on the module
  6. Functionality retest
  7. Return it to you

Replace and return

  1. Purchase a replacement module that we have done the following tasks on it in our lab:
  2. Internal inspection and update, as directed by manufacturer technical service bulletins.
  3. Functionality testing
  4. Update the programming on the module (Either complete plug and play or only engine programming)
  5. Functionality retesting
  6. Ship it out to you
Damaged module before remanufacturing The same module after remanufacturing

Our department can work wonders! Here is another example of a successful remanufacturing by our team of experts.

Availability, turnaround and warranty

Do we have the module
you are looking for?

There are so many options it would be almost impossible to keep the inventory up to date. But chances are, if it has wheels and electronics, we have or we can get the part you need. Even if you think yours may be hard to find, give us a call. We can work wonders!

How long before
you get your new module?

Turnaround will depend on how busy we are at that time. Turnaround time is usually between 1-3 business days. Shipping is up to you how quick you would like it back.

Is my replacement /
repaired module protected?

All modules that are purchased from or rebuilt by us have our One-Year No Hassle Warranty against defects in workmanship. Warranty covers part replacement only; as a rule, and an industry standard there is no refund on the services we provide. Consult our documentation for more details.

Opened electronic module on a workbench Circuit boards of a module being repaired

Major module models and part numbers

Here is a short list of the most common electronic modules found on the market and their respective part number. It is far from an exhaustive list, as there are many model variations. Even if yours is not in these charts, we will repair or find a replacement for it.

CPC4 module
ModelP / N
CPC4RA0034461002
RA0034463402
Celect Plus module
ModelP / N
Celect +3408300
3408303
3096662
Celect module
ModelP / N
Celect3084473
3619037
3618046
Caterpillar 70-pin module
ModelP / N
CAT
70 pins
10R3571
10R8732
10R8026
10R4094
10R4090
10R4091
10R7706
Caterpillar 40-pin module
ModelP / N
CAT
40 pins
10R4085
CAT
120 pins
10R5649
10R6199
10R5647
Paccar module
ModelP / N
Paccar2298831
2298832
2298833
Detroit Diesel DDEC module
ModelP / N
DDEC IV23519307
23519308
DDEC III23513553
23535990
IDM4307211R92
Cummins module
ModelP / N
Cummins 8713684275
Cummins 8703684009
Cummins 5703681405
Cummins 5703408501
Cummins 2350 module
ModelP / N
Cummins 21504943134
Cummins 22504993120
Cummins 23505317106
Cummins 5503990517
Cummins 5703680509

Various electronic module types

What is an ECM, ECU or PCM?

An engine control module (ECM), engine control unit (ECU), also known as power-train control module (PCM), is a type of electronic control unit that determines the amount of fuel, ignition timing and other parameters in an internal combustion engine needs to keep running. It does this by reading values from multidimensional performance maps, using input values (e.g. engine speed) calculated from signals coming from sensor devices monitoring the engine. Before ECM’s, air/fuel mixture, ignition timing, and idle speed were directly controlled by mechanical and pneumatic sensors and actuators.

What is a CPC4?

CPC4 (Common Powertrain Controller) – a VHS tape size black plastic box (size: 7″ wide x 4.5″ deep by 1.5″ tall) will be somewhere inside the cab and is often located under the dash or under the passenger seat (but this can vary from truck to truck). The CPC4 is the interface between the MCM (Engine Control Module) and the vehicle/equipment for engine control and manages other vehicle/equipment functions. The OEM is responsible for mounting this part in an enclosed, protected environment.

What is a BCM?

A body control module is a computer component in a truck that checks, regulates and operates electronic devices throughout the vehicle. When electric devices first began being used in trucks, each device was governed by a separate electric component. There was a module for the air-conditioning, a module for the interior lighting, a module for the door locks, and so forth. A body control module gathers all these separate modules under one system so that they function together instead of separately, a format easier to both manufacture and troubleshoot.

  • Caterpillar
  • Cummins
  • Detroit Diesel
  • Deutz
  • Genie
  • Isuzu
  • John Deere
  • Komatsu
  • Mercedes - Sprinter
  • Mercedes Benz
  • Navistar / Maxxforce
  • Paccar
  • Volvo
  • Volvo / Mack

Get a Quote

By telephone

By email